Introduction
We make a truly portable and highly reliable mA Simulator which can be used for mA Source and Sink facility is built in. The Simulator is designed to suit the Instrumentation Lab as well as field calibration. This can be used as a better tool for troubleshooting and confirmation of instruments, Hence, it is very useful for Commissioning, Quality assurance, and Routing Maintenance.
Features– mA Simulator suppliers
- Hand-held, battery-operated, Portable Source mA and Sink mA as per requirement.
- Typical Accuracy 0.1% ± 1 digit
- Optional battery eliminator for operation on 230Vac mA Simulator suppliers
- Maximum load 500 Ω
- mA Output range 0-25 mA
- mA Measurement Range 0-19.99mA mA Simulator suppliers
- Facility for quick Calibration using selector switch mA Simulator suppliers
Technical Specifications – – mA Simulator suppliers
| Power Supply
|
Two batteries of 9 V, Size PP3 (Optional) Battery Eliminator for 230V AC Operation |
| Indication | 3 ½ digit LCD with battery Low indication |
| OperatingTemp. | 0 to 50 ⁰ C |
| Effect of Temp.Change | 0.002% per Deg. C ref 25⁰ C |
| Humidity | Maximum 90% Rh non-condensing |
| Battery life | 4 Hours in case of continuous operation for full current output with Standard battery |
| Storage Temp. | 0 to 70⁰ C |
| Size | 170 (H) * 90 (W) * 45(D) |
| Weight | 1kg approx. |
Specifications – – mA Simulator suppliers
Functional Description – – mA Simulator suppliers
- Power ON : This switch powers the instrument when switched “ ON”
- Mode : Source (Generation) or Sink (Measurement) with Toggle switch.
- Battery Eliminator : (Optional) This facility is provided in the calibrator to suit the operation on 230Vac 50 Hz ± 10%. As soon as you connect the eliminator Socket, batteries get disconnected automatically & vice versa.
- Battery Replacement: When the “ Low Bat” Indication appears on DPM, the discharged batteries must be replaced, otherwise the accuracy will not be achieved. For the mA Simulator supplier replace the battery, remove the side bottom plate & then slide out the bottom plate on which the battery is firmly placed.
- mA Simulator: Can be calibrated easily. Remove the top plate. Potentiometers for Zero and Span are easily accessible.
- Quick Calibration: Selector Switch can be set for 4, 8, 12, and 16,20 mA to get appropriate output in Source Mode
Application –
- mA Simulator for calibration of process control instruments and systems for various industries such as cement, Chemicals, Dyestuff, Paint, Drugs, Pharmaceuticals, Sugar, Paper, Glass, Food Industries, Steel, Synthetics, Auto, Air Conditioning and Refrigeration. mA Simulator suppliers
- As fault fault-finding tool.
- Quality Assurance tool for ISO 9000, QS 2000 companies for control of Inspection & Measurement.